Skip to content

Mold Removal Calgary

What are the basics of Mold Removal?

If you discover any spots of mold, you need mold removal calgary. To spot mould you're looking for signs of moisture or detect a musty odor in the home or office, contact a mold removal company before spending on mold testing. It is the responsibility of the company to give you an evaluation of the situation and tell you the gravity of what's on the ground. If the company later advises you to get further testing, then you would need to hire them as a certified mold assessment consultant to inspect samples from the affected areas for mold testing. In Calgary Company that test for mold cannot be the same to do the eventual mold removal services, for that fact that mold Inspection Company would also retest and certify the affected areas once the remediation is completed.



The company to access both the mold inspection and removal of the mold must be licensed by the relevant agency so as to protect you and make sure the work is carried out by the regulated standard. Immediately, the removal is completed you will be given a Certificate of Mold Remediation that states that you home have been successfully remediated. It is this mold assessment that leads to the protocol describing what work needed specifically in the removal of mold. The work will consist of removing mold contaminated materials, using the required technology to get rid of the mold spores, cleaning and sanitization of the affected areas and sealing of the concerned materials. These should be done in containment with less air pressure so as to make sure that the mold spores don't escape the affected area and contaminate other areas. If the work is not done in confinement, the spores would become airborne and eventually land on other clean areas inside the home or offices during the demolition work. The escaped spores could not only be inhaled and cause health related issues but could also start mold growth in other places that are currently not contaminated.

During the removal of the molds, dehumidifiers are also used to eliminate the moisture that causes mold to grow. Required air scrubbers would be used to remove the mold spores from the air. All the debris removed from the concerned area would put in a protected bag, and the outside of the bag would be vacuumed before sent away. When the mold has been removed by the specialist and the cleaning with the disinfecting has been completed, the areas cleaned would be vacuumed and sealed. Air scrubbers would be used until the mold assessment specialist takes the samples for clearance testing. In case any part of the cleaned area fails testing it will be reclined under the same containment. Immediately the final clearance is issued the containment will be removed, and certificate of mold remediation is filled out by the company.

Guide To Choosing A Professional Company For Domestic Cleaning

When it comes to cleaning the home, time may not always work in your favour because of your busy school or work schedules. Because of that, you may need help from professional cleaning services. Many companies offer domestic cleaning and you may have a hard time deciding which one to go to. This article will discuss some tips to serve as your guide when looking for professional cleaning companies.

Professionalism

A cleaning company, which takes your request in a timely manner and handles it on a professional level is guaranteed to give you better services. Do not choose a company that says they have quality services, but do not know how to deal with your request. The kind of service that you will receive is measured by the way they deal with you.

Flexibility

You need a cleaning company, which can adapt to your needs and able to address them immediately. It is not ideal to go with a company that will only offer you a generic cleaning service. For example, you need to get your home ready for an event and you want to receive a spring cleaning service. You may not be satisfied if the company you choose only offers regular house cleaning. Domestic cleaning involves several aspects, so you need to check if the company offers flexible services and charge you only for the cleaning tasks you receive.

Reasonable Price

Certainly, you want a company with affordable prices and offer excellent cleaning services at the same time. Make sure that you do not choose a company with cheap prices that may compromise the quality of their services. This means going with a company, which offers prices based on the services you need.

Safe Cleaning Products

You may opt to provide your own cleaning products, but if not, make sure that the company will use safe cleaning products. Harsh cleaning agents can easily wear out items and in just a short time, your fabrics can tear quickly and your surfaces will look dull. It is always best to go with a company, which uses safe products to ensure that there are no harsh chemicals involved that may potentially harm your health.

Quality Services

You need a company with trained staff when it comes to all the aspects of domestic cleaning. They are the right people who can take care of your cleaning needs. Experience is also important, so check out the number of years the company has been in the business and read some reviews.

How To Spot A Person Affected By Black Mold

There are various kinds of molds all over the world but one of the most toxic may easily be thriving in your home. Black mold is a common enough fungus that it can grow almost any place where conditions are optimal. The toxicity of this kind of mold can cause several different health issues and may even lead to a fatality. It is important that professionals are the ones to handle mold testing as well as mold remediation because black mold is very dangerous. In Texas, mold experts are trained and experienced with different kinds of ways and means of assessing a home and checking the possible places where black mold might grow. It is important, however, that the home owner is not close by when the mold professionals try to find places where mold might be thriving. The reason behind this is that mold spores can fly out at any time and attach themselves to wherever they land.

Symptoms of Black Mold

Although a mold colony starts out quite small, the effects of having a black mold colony in the same house can be devastating. This is because the people may not have any idea that it is mold poisoning and blame other factors. With this in mind, it is important to know and understand black mold symptoms and what they represent. The following symptoms may or may not be all present but most should be there.

- persistent coughing

- sneezing

- itchy eye lids and/or red eyes

- itchy nose

- rashes

- a runny nose

- watery eyes

- chronic fatigue

- headaches

- difficulty breathing (extreme cases)

- allergic reactions

- irritability due to allergic reaction

- hay fever like symptoms

While some of the symptoms of this kind of mold are pretty common and may initially be thought of as a mere allergic reaction, the combination of the symptoms should be able to tip a competent doctor regarding what kind of ailment it actually is. When a person has been exposed to black mold, some or most of the symptoms listed above should manifest within a few days. Prolonged exposure can result to more intense symptoms and even perhaps a fatality, if the mold spores are inhaled consistently.

Preventing Exposure

Because mold colonies usually start and thrive in dark and damp areas, chances of the home owner actually spotting one is slim. This is because some individuals have no idea what to look for even if it is already staring at them in the face. The following possible places which may be prone to fungal growth include, but are not limited to:

- under kitchen and bathroom sinks

- basements

- in between drywall

- underneath floorboards (especially if the house has been flooded)

- on bathroom tiles

- close to windows or window sills

- inside cabinets and closets

- on damp clothing or fabric

- ceilings

- shoes which have not been used for a long time

- areas with plants

- areas with high condensation or humidity

In Austin, Texas, mold specialists have a systematic way of dealing with the problem of an infestation. More often than not, the professionals will recommend detecting areas with mold, testing what kind of mold is present in the house or building, removing the colony upon the agreement of the home owner, rehabilitation of the area which may have been damaged by mold or affected by the removal of the cellulose material on which the mold grew on.

Saving Energy Where You Can, As You Can

Energy is bigger than the monthly bill you pay. Energy is the basic foundation to everything that affects your life indoors and outdoors. Only mankind could find a way to reduce energy to watts, kilowatts, and monthly bills. Every member of the human race must accept the responsibility of limiting energy consumption for the sake of everyone else.

In a typical American household the breakdown of the monthly electric bill goes something like this:

-44% goes to the HVAC systems (heating and cooling) -33% goes to lighting and other appliances -14% goes to water heating -9% goes to refrigerator and freezer

Now, with that breakdown, lets see exactly where you can trim your energy usage and save more money for your home budget.

Responsible Heating and Cooling:

These two climate control considerations amount to at least half the total electric bill. Tackle these and save.

Every sixty days clean the air filters.

Check to see that baseboard heaters, air registers, and radiators are functioning correctly and that carpeting, furniture or drapes do not block their access.

Arrange the thermostat to as warm as possible when it is hot outside and as cool as possible when it is cold outside.

Dont let any exhaust fans (kitchen, bath, others) run longer than 20 minutes after bathing or cooking. These really affect the room temperature and can throw off the functionality of your air control systems.

Manage Lighting and Appliances:

Natural light has medical and health benefits that artificial light cannot substitute. As often as possible, work and function closer to the light from the window or doorway and avoid using electricity.

Dont leave lights on when you are no longer in the area. It doesnt cost more electricity to turn it off and there is no benefit to leave it on.

Reflective backing can bring greater illumination to your lighted areas, particularly when using four-foot fluorescent lights.

Replace 60 watt incandescent light bulbs with much lower wattage mini-fluorescent bulbs and get the same illumination for much less wattage.

Unplug all those charging devices that have a block-shape transformer. Even though they are not attached and charging another device they consume small amounts of electricity when plugged in whether turned on or not. all lights and appliances when not in use. Even standby mode does not completely shut off their energy consumption.

Shop for Energy Star label:

Energy Star is the indicator that electrical appliances and fixtures (including light bulbs) have been tested and do indeed conserve more energy than their counterparts.

Task lighting is the strategic use of light only where the task is being conducted and not throughout the entire area you are occupying. For instance, use a reading lamp rather than the overhead room light when enjoying a good book.

Use the cold wash cycle and reduce the consumption of energy by as much as ninety percent. Take it to one hundred percent savings by air drying rather than machine drying altogether.

Save up your laundry and wash full loads each time. The electricity is expended for a greater amount of clothes and savings mount up over time.

Maintain the optimum temperature for your freezer and refrigerator. The motor is constantly adjusting to the exposure of the open door and it has to work harder to maintain the temperature you set. Avoid this unneeded consumption by closing the door as often as possible.

Keep an eye on how tightly the door gasket closes against the door. Cracks, creases, and indentions can cause leakage.

Insulate, Insulate, Insulate:

Heat loss happens if there is not a constant and continuous seal barrier to the home. Check all windows and doors for proper weather stripping or caulking. You can get more information at homewindowsreplaced.com.

Verify that air leaks are not happening around the pipes, doors, walls, floors and ceilings. Just closing down these drafty places can save as much as ten percent in electric bills.

Crawl Space Insulation Best Practices: An In-depth Look At Moisture Control

The ill-effects of poor crawl space insulation include significant energy losses, uncomfortable indoor temperature during summer and winter, excessive moisture accumulation, pests and mold growth. That said, its important to understand that effectively insulation the crawl space goes beyond just installing the right type of insulation material. Other key practices include providing sufficient drainage, choosing the right method of installation, sealing all air leaks and controlling moisture. Lets take a look at moisture control in particular.

Control Of Moisture Accumulation

Moisture accumulation is one of the visible signs of a poorly insulated crawl space. There are two main sources of moisture: the ground, and the outside air. Until youre able to eliminate these sources, you cannot effectively insulate your crawl. Lets look at each of these sources in detail. By the way: if you would like to read even more interesting information about crawl spaces and how you can isolate them, then we advise to take a look at http://www.regioisolatie.nl/waarom-kruipruimte-isolatie/.

a) Control Ground Moisture Using a Vapor Barrier

Ground water is likely to evaporate into your dirty-floored crawl and soak the wooden structures and joists. Additionally, it will also filtrate your floor and concrete walls, making them damp most of the time. Though most contractors and even building codes recommend that you line the crawl with waterproof ground cover to prevent water evaporation into this space, this wont address the problem of water sipping through the walls.

Therefore, to effectively control ground moisture from the crawl space, consider lining the area with something that will completely isolate it from wall and ground moisture. What am I talking about? Line the entire space (walls and floor) using a flexible poly sheet vapor barrier if you leave in an area with a warm climate. If you properly air seal and condition the crawl, you wont need to add insulation. However, if you live in an area with a colder climate, consider using both a vapor barrier together and a foam board to provide thermal protection as well as a vapor barrier.

Many people tend to use 6mil poly sheet to line their crawl spaces, but for better and lasting results, its recommended that you use 10 or 20mil poly sheet liner instead. Be sure to fasten the liner to the walls so that it doesnt tear easily when crawled on during maintenance visits and inspections.

b) Air Seal The Crawl Space To Control Outside Air And Moisture Infiltration

During warmer days, the outside air will cool down, when allowed to enter the crawl via the vents. When this happens, the RH (Relative Humidity) will increase by about 2 percent for every degree that the outside air is cooled. When the RH levels rise above 60 percent, mold will develop, and this occurs quite often during summer.

RH levels arent so much of a concern during winter, but if youve got pipes and ducts in your crawl, some condensation might occur. The biggest problem for most homeowners during winter is the infiltration of cold air into their living space. As you may have already noticed, the floor and overall indoor temperature usually becomes colder during colder months.

This is where air sealing comes in. The main goal of air sealing is to enhance your homes energy efficiency. Without it, crawl space insulation wont be as effective. So, make sure your access to this space is through an outside entry, which you can effectively air seal when not in use.

Overall, moisture control is an important component of effective crawl space insulation that you should never ignore. When done properly, it can eliminate mold problems and rot, thereby protecting your familys health and your homes structural integrity.

Avoid Dengue Fever – Have Retractable Screens Installed

A recent warning issued to people in Queensland is more than enough of a reason for homeowners to have retractable screens installed around the house. The warning was about the possible emergence of Dengue fever which was detected at the Port of Cairns in far north Queensland.

Unfortunately we are inundated with flies in this country but these insects are mostly harmless. Mosquitoes on the other hand can cause diseases, not the least of these Dengue fever – a disease usually found in tropical, developing countries.

Earlier this year, the Asian Tiger mosquito was detected at the Port of Cairns and authorities took this discovery seriously because this little insect is credited with spreading dengue fever, ross river virus and chikungunya. The mosquito is native to the Torres Strait, but this case proves that it can find its way to mainland Australia.

Thankfully there were no reports of this mosquito reaching the main centres of the country, an adult female was identified next to a berth for international vessels in Cairns. It obviously made its way to Australia on one of 3 possible ships that were docked in the port around the time.

At the time authorities issued concerns that thick vegetation around homes in the area would provide an excellent breeding ground for these insects, but as homeowners while we can’t control these insects making their way to Australia, we can control the entry of insects into our homes.

Keeping insects such as possibly dangerous mosquitoes out of your home is not a luxury but a necessity,that means having retractable screens installed wherever necessary.

It’s best to have both windows and doors covered with screens to control the influx of insects into your home.

And don’t think insects are only a concern in summer. Around the year, insects can make their way into your home and pose a threat to your family. Mosquitoes are a particular threat even breeding in cooler climates.

If you want to enjoy your home throughout the year, having Pleated Retractable Screens installed is the best solution.

We’re a leader in retractable screen manufacturer and installation. Our products are of the best quality available in Brisbane and our installers are experts.

The retractable screens available through us are durable and able to withstand even the harshest climatic conditions.

Freedom Screens are experts at providing eco-friendly screens, fitting into discreetly into your home and family while increasing the potential of your home.