Skip to content

Helpful Do It Yourself Rooftop Tips

These days with the internet and all useful things, do-it-yourself roof jobs can be easily completed in few steps even if this is first time for you. DIY projects are good because with them, you will save both money and time and by the way, you will improve your skills working with tools by completing your roofing project on your own. Try to Remember This Before you start working on any kind of roofs, the most important thing is safety, you must follow safety precautions, and if you start, it is the best way to do that with a partner or even better to work in a team. First of all pick a safety place where you will place your ladder and make sure that the ladder is extendable, also make sure that you put some rubber on the picks so you will avoid damaging the walls of the house. Be careful if you have some cables on the roof and always choose dry and warm weather to work. Dont work on windy or rainy days, you may slip and fall off the roof, in that case if you are not sure that you can finish the DIY project you can always call the professionals and they will finish the job for you. Always wear protection on your hands, wear gloves and goggles just to be safe. Roofing Materials That You Will Need You can find the materials at the nearest hardware store, try to go in two or three stores and compare the prices if you want to save more money and thats how you will know where you will find the cheapest materials to work wth. Lets start with roofing shingles, they are sold in squares that include three or four bundles a piece. To find the proper way or to figure out the number of the roofing shingles you need to divide the amount of the square footage of the rooftop by one hundred. However, if you can afford to purchase few more shingles, getting them is not a bad idea, that way you will work freely and not think whether you have just enough. When it comes to the nails, there is a math to by them depending of the each square, for example for each square of shingles you need to buy between 2 and 2 ½ pounds of nails or if you are not sure again ask for manufacturer recommendations. For the exact amount of roofing felt, you need to measure the entire roof and you need additional material for the edges, ridges and flashings. All material that you will need can be found at your home improvement store and you can ask for advice. Make sure about the materials you have bought that your new shingles lay flat and secure on the surface and its better if you remove the old ones. Quick Tips to Lay Shingles in Roof Valleys Like Professionals First things first, what is a roof valley? The spot where the two roofs join together at a specific angle, that is what we call roof valley. Roof Valley is a little bit complicated and you must pay attention when you apply the shingles to this particular area, because if you maka a small mistake it will leak somewhere inside your house for sure, which is not good thing because you will need to fix it again. You can start with covering the area with roll roofing material, after you do that, place a wide strep metal flushing downward the center of the roof valley, try only to nail the outer edges of the material while the material is laying flat with the roof valley.

affordable roofing tampa