Skip to content

How To Avoid A Cold Shower And A Cold Shoulder From The Wife

Upon coming home from a busy day in the winter, is there anything better than a hot beverage and a warm shower? You can survive running out of marshmallows for the hot cocoa, but taking a cold shower is one of the most depressing thingsany person can go through.

The hot water tank generates the warm water inside your home. You probably dont even think of it until you take that cold shower. There are several issues that can limit the amount of hot water your tank generates and distributes. When your water heater starts performing poorly, the following issues may be the culprits.


The easiest thing you can do when you are running out of water is to wait. A certain amount of water from a reserve of 30m gallons or above is heated up by a tank. But when the water heater runs out of that warm water reserve, it has no recourse but to distribute cold water. If you want toavoid running out of warm water, household members must take showers when other home appliances are not in use. Moreover, if you have more than 5 people living in your house, you probably need to buy a larger water tank.


Another issue you might encounter in any typical home thatcan lead to a dwindling hot water supply is when the pilot light goes out. This problem is a fine example when your water heater no longer produces hot water but not require a drastic replacement. The water that goes through your pipe is heated by the gas that is set on fire by the pilot light. Through the deduction process, you cannot possibly have hot water when there is no working pilot light. You might have the misconception of needing to replace your entire unit when in reality, what is required is five minutes of your time and a barbecue lighter.

You can easily DIY lighting up a failing pilot light. Most modern models sport an ignition switch that can be switched fromgas into pilot mode and clutched for a few seconds before the pilot light eventually lights up. On the other hand, you need to physically light the pilot light if you own a conventional model. Hence, make it a habit to review your manual todetermine what kind of unit you have.


A possible sign that you thermocouple needs replacement is when the units pilot light no longer fires up, or if it fluctuates on and off. If you are pretty handy with DIY stuff and quite confident yourself, it will be easy for you to change the thermocouple. But if you are in the dark when it comes to hot water heaters, your best recourse is to call the professionals who are trained to do the job. You want the peace of mind upon knowing that there is no leak in your water heater, so hiring the services of an expert is your best alternative.


Your shower will most likely deliver cold water and leave you shivering in the midst of your shower once you have a faulty breaker.It is a challenge to notice when your breaker starts to malfunction because it is most likely that only your basement or utility room is out of power and not your entire home. If you have a faulty breaker, water will no longer be heated because nothing will power the heating elements anymore. If what tripped the electric breaker was just a random thing,you wont have to face any lasting issues and you can easily turn it back on. Unfortunately, if your water heater is the reason itself for the trip, it explains why it is no longer working and need a replacement. The heating elements are fairly easy to replace, but if your water heater is nearing its lifespan and is over ten years old, your only recourse is to purchase a new one.


Another issue that usually plagues water heaters and might be a possible reason that it gives off lukewarm water is neglecting to check the dip tube. The plastic that goes through the entire expanse of the pipe is a dip tube. It travelsfrom the cold water inlet all the way to the bottom of your heater where the actual water is being heated. A broken dip tube will allow the cold water to blend with the hot water and deliver an equal 50/50 solution of cold and heated water. It is also easy to change your dip tube. However, it requires you to cut the pipe, which might frighten an inexperienced homeowner.


The two modules on your typical water heater are located on the upper half and on the lower half, also labeled as the elements. There is a big likelihood that one or both of these elements are already defective if your hot water system keeps on dispensing cool water rather than warm water. It is also the likely culprit if your breakers keep on tripping as well. It is the lower element that carries out majority of the work since the cold water goes inside the unit at the bottom and goes up because of the pressure inside. The upper element of the unit mainly carries out the maintenance part of your unit, but it can start to malfunction too. This malfunction on the upper element usually happens when the lower component already start to fail. A multimeterdetermines the physical state of these components. Youll be aware when you need to replace it and youll get a pretty specific diagnosis and find out the exact root of the problem.


If the hot water system is consistently delivering cold water, this could possibly signal that you need a larger tank.Try to check bigger units that is commensurate to the number of household members, or the mere size of your beloved family. An additional bathroom is also a major factor that affects your hot water supply.


No Trackbacks


Display comments as Linear | Threaded

No comments

The author does not allow comments to this entry

Add Comment

Form options